The RTP 250 Robotic Tube Packer is an automation solution for the tube packaging industry, which uses a 6-axis robotic arm for high-speed pick and placements of tubes (plastic tubes, laminate tubes) into boxes at a speed of up to 250 tubes per minute.
This machine is used as the work surface when packing/unpacking. The staff at both sides put the packaged bottles into the box. The device is robust and its structure is simple. It is the ideal auxiliary production line equipment
Vibrating feeder is for temporarily storing and transferring dry, free-flowing food and non-food products to bucket elevator for the following packing line. Bucket volume is 150 L. Production capacity is 3 – 5 m3/h.
This machine can reduce the temperature of hot filling drinks to 36℃-40℃, or increase the temperature of cold filling carbonic acid drinks to 36℃-40℃. It is used in PET bottled hot filling drinks or carbonated drinks production line. This machine can eliminate the condensed water on the external side of bottles, keep bottle clean and dry, also has antiseptic effect.
All SUS304 stainless steel frame, elegant and compact, non-coating process, pollution free. Equipped with large size stainless steel steam storage tank, which stores enough steam to provide stable and even steam spray, and this helps shrinking effect perfect. Dual wall design for energy saving, heat isolation and operator protection.
The drying machine XHP-II can be used as a dryer for medicine, chemistry, food, agricultural and by-products, marine products, light and heavy industry such as raw medicine, Chinese herb, Chinese herbal tablet, extracts, powder, bottle for packaging, dye, paint, dehydration of vegetables, fruits and nuts, plastic epoxy resin and components, baking dyes, etc.
The bale shredder is the perfect choice when it comes to shredding large bales It comprises a hopper, a chain conveyor and four shredding rollers. The unwrapped bale is loaded into the hopper and falls onto the conveyor, which drags it towards the rollers. The peat is then gradually shredded when coming into contact with the four rotating studded rollers.
The Disc Screen is an efficient and cost-effective choice for high-volume coarse screening applications. Materials pass through a series of rotating shaft assemblies that all feature a set of steel discs arranged at precise openings to provide the desired product separation. Fine material falls down through the disc openings, while over-sized material is conveyed to the end of the screen and discharged into a bunker or onto a reject conveyor.
The Hammer Mill is designed to shred pre-screened prior to the mixing or bagging step. It consists of three screens forming a basket and four rows of free-swinging hammers mounted on a 24-inch (300 mm) high-speed rotor. The hammers are made with steel plates that are ½ in (13 mm) thick and can be turned/rotated three times so as to use all four sides before replacement is needed. The screen opening size may vary from ¾ in to 2 in (19 to 51 mm).
Premier Tech’s HML Series Mill is designed to efficiently shred loose and batt material, or products with similar characteristics. Typical applications are edge trimming and scrap product recycling. The product is fed through an infeed conveyor and directed to the inlet of the mill. The product is cut by a set of rotary knives that push the product through a stationary grate. The grate can be delivered with different spacings to achieve different sizes of finished product. The design of the grate and knives, combined with a relatively slow rotating speed, gives a very high quality product that is cut instead of crushed. A pre-shredder is available as an option for greater density materials.
