Designed to erect and form cartons, fold and seal bottom flaps fully automatically. Horizontal filling magazine design. Delivers and feeds flat unfolded cartons consistently. User friendly and easy to adjust handle for special cartons. PLC controlled. Productivity is 6 – 12 cartons per minute.
Designed to erect and form cartons, fold and seal bottom flaps fully automatically. User friendly, durable, easy to operate and load tapes. PLC controlled. Productivity is 6 – 10 cases per minute.
Designed to erect and form relatively larger cartons of special style. Equipped with sensors to prevent out-of-carton and erection failure, failure of sealing and overloading. PLC controlled. Productivity is 6 – 12 cases per minute.
Designed to erect cartons and close them after interconnected filling machine. Cartons are closed by hot melt adhesive. The machine is equipped with automatic leaflet insertion device. Easy and fast changeover, optimal speed is 120 cartons per minute.
Designed to erect carton boxes out of folded premade dummies. Fully cam driven continuous system assures positive and stable motion with maximum stability. Can work with all types of adhesive tapes. Output depends on the model and can reach up to 40 cartons per minute.
The C-Series provide the structural integrity to deliver the performance their designer intended. From the moment a blank enters our case erectors' magazine until it exits the case erector as a properly formed and bottom sealed case, it is under complete control. A unique pickup frame pulls the case from the magazine and forces it to open so it is square. The flaps are folded before the case moves, making it rigid and locking in its “squareness”. A pusher bar, parallel to the rear wall, delivers it to spring-loaded side belts, which move in or out to compensate for variations in width, and carry it over the sealing device.
XT-40 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H18 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
XT-40H25 is suitable for molding and sealing boxes of the same size. If you need to change the size of the box, the operator must manually adjust the machine. The machine is designed so that the molding, folding and sealing process is carried out simultaneously. Cardboard blanks can be added at any time without stopping the machine.
The carton erector machine can finish the work of carton opening, shaping, folding and sticking the adhesive tape in the bottom of the carton. Applicable carton size is 250 – 450 (L) x 150 – 400 (W) x 100 – 400 (H). Productivity is 8 – 12 cartons per minute. To operate the machine needs compressed air with pressure 5 – 6 kg/cm3.
